Facade Stock Is Bought by the Job
A window shop can reorder a white frame profile every week. A facade shop works differently. When a tender is won, the system profiles are ordered in the finish the architect chose. They often arrive weeks before the first cut.
Meanwhile the next project lands in another colour. The rack now holds anodised bars for one tower, coated bars for a school and spare lengths from a closed job. Someone has to find the 6.5 m mullions for level 4, under three other bundles.
In our system, each storage unit is booked to a job number in the warehouse management system (WMS). The booking also holds the profile code, finish and length. The units of one job can sit in any free location. The WMS keeps the list, and the gantry brings out the units your planner calls for.

Long Mullions, Finished Faces
Two things damage facade stock in storage: bars that hang over the end of a rack, and chains or slings on a coated surface. The store is designed against both.
Unit length
We size the storage units to your longest profile plus about 50 mm (2 in) at each end, so no bar sticks out. For 6 m (19.7 ft) bars, units are about 6.1 m long in a typical CK project with aluminium profiles. Systems for 9 m and 12 m material have also been built. If only a few of your mullions are longer than 6 m, tell us; it decides the unit length for the whole store.
Handling
The gantry lifts the steel storage unit at both ends, and the profiles never touch a hook. Bars stay in the unit from the loading station to the rack and back. Protective film stays on until the profile is machined. Supports inside the unit are designed from your profile list, because a slim transom bends more than a deep mullion.

Feeding the Saw and the Machining Centre
Planning calls off the units for the next floor or panel batch. The gantry sets them on the loading station, where operators take the bars to the double mitre saw or the profile machining centre. The loading station can be placed next to that machine. We confirm the interface for each machine make and model.
A double-deck loading station lets more than one unit come out at a time. That helps when one batch needs mullions and transoms from different units. Part-used units go back to the rack with the same job number, so the remaining bars are not lost.
Unitised and Stick-Built Shops Use It Differently
A unitised shop builds storey-high frames on an assembly line. Its machining centres need the same mix of profiles every day for weeks. The store works as a steady buffer in front of the line, and call-offs follow the frame schedule.
A stick-built shop cuts and machines mullions and transoms, then ships them as kits to site. Its demand comes in bursts tied to site progress. Here the value is in holding several jobs without mixing them, and in finding the right bars when the site asks for the next elevation.

Specifications
Values marked "typical" come from finished CK projects. Your quotation lists the figures for your layout.
|
Group |
Item |
Value |
|
Capacity |
Load per storage unit |
Up to 5,000 kg (11,000 lbs); usually 3,000 kg (6,600 lbs) for 6 m and 5,000 kg (11,000 lbs) for 12 m material |
|
Dimensions |
Storage unit length |
Longest profile plus about 50 mm (2 in) at each end |
|
Dimensions |
Gantry height |
Up to 10 m (32.8 ft) |
|
Dimensions |
Rack height |
7 to 8 m (23 to 26 ft) |
|
Racks |
Type |
Fixed cantilever racks, single or double sided; or mobile cantilever racks on floor rails |
|
Operation |
Gantry travel / lift speed |
Up to 25 m/min (82 ft/min) / 6 to 8 m/min (20 to 26 ft/min), typical |
|
Operation |
Positioning |
±2 mm to ±5 mm, typical |
|
Control |
Software |
WMS with location management, first-in first-out rules, stocktaking and handheld barcode terminals |
|
Power |
Supply |
380 V, 3-phase, typical; installed power calculated for each project |
|
Construction |
Finish |
Powder coating as standard; paint or hot-dip galvanizing on request |
For indoor storage. Each quotation states whether the storage unit's own weight is part of the load rating.
Gantry Store or Crane-Served Racks
|
Point |
Automated gantry store |
Roll-out profile rack with crane |
|
Finding a job's profiles |
WMS list by job number |
Rack labels and a printed list |
|
Contact with finished faces |
Profiles stay in steel units |
Slings or a lifting beam on each bundle |
|
Storage height |
Racks 7 to 8 m (23 to 26 ft) |
Up to about 5 m (16.4 ft) recommended |
|
Lead time |
60 to 90 days |
35 days for standard racks |
A shop with one or two jobs in progress and a low hall is usually better served by a crane-served roll-out profile storage rack. The same applies if your system supplier delivers profiles just in time for each cutting run. If you want cassettes without a gantry, see the cassette-based honeycomb racks on our main website.
A Typical CK Project with Aluminium Profiles
An aluminium profile processor stored 6 m profiles on the floor. Operators moved the top layers to reach the ones below. We installed a gantry store with a 5.6 m (18.4 ft) high gantry and 65 m (213 ft) of racks. Each storage unit holds more than 600 kg (1,320 lbs). In this project, one operator now does the storing and retrieving that used to need at least two people.
Two other stores on this site show the same equipment for aluminium: a 6 m store built for balcony system profiles and a 12 m mobile store for aluminum extrusions.
Delivery and Certificates
Lead time is 60 to 90 days, including a full trial assembly and function test in our factory. A factory engineer commissions the system on site. The warranty is 1 year and can be extended, and wear parts ship with the order. We are CE certified and hold ISO 9001:2015 and ISO 14001:2015 certificates. The racks are a patented design (China utility model patents).
FAQ
Plan a Store for Your Facade Shop
Send us the details below. We return a layout drawing and a price.
- Profile systems you use and the longest and shortest bar lengths
- How many jobs you hold at once and the tonnes per job
- Finishes you store: mill, anodised, powder-coated
- Saws and machining centres the store should supply, with make and model
- Hall drawing with clear height, column grid and crane runways
- Whether you build unitised frames, stick systems or both
Request a facade profile store layout and quote.
Hot Tags: automated facade profile storage system with gantry robot, China automated facade profile storage system with gantry robot manufacturers, suppliers, factory




