The daily and regular care and maintenance of shelves also reflects the top priority of after-sales service management of this shelf company. Regular shelf care and maintenance of customers can ensure that the shelves can store goods efficiently and use them safely. During maintenance, problems can be discovered in time, and professional horizontal positioning tools can be used for timely correction. More professional technology can be used to effectively correct the shelves in a timely manner to ensure the safety and load-bearing capacity of the shelves during use. During cleaning, if any part of the shelf that is deformed due to collision is discovered in time, we should promptly replace the accessories in that part to ensure safe and efficient storage of goods. During maintenance, what workers should do is: fastener tightness detection, three-dimensional vertical measurement of shelves, measurement and recovery of damaged parts, and based on the above measurement data, maintenance can be carried out more accurately. Customers should pay attention to not exceeding the overload weight, sealing degree and line position during use, so as to ensure the safety performance during storage.
What should be paid attention to during the installation process of shelves: For example, through-type shelves are suitable for large quantities and small varieties of goods. The storage of goods is relatively dense, so its requirements must be high stability. He requested many shelf accessories and high quality. Through the connection of accessories and column pieces, goods can be efficiently and safely stored on the corbels. It is composed of (head beams, single and double-sided corbels, top pulls, corbel corner guard column pieces, etc.) through-type The shelves are not divided by channels. They are continuous overall shelves. The pallets are stored in depth direction, one after another. The support rails are on the corbels. This makes it possible to store goods at a high density and is often used to store large quantities of the same type. Goods can make full use of warehouse space. The shelf should not be too high and should be controlled within 10 meters. In order to enhance the stability of the shelf, a tightening device should be set. The single pallet of goods should not be too large or too heavy (the weight should be controlled at about 1500kg). The span of the pallet should not exceed 1.5 meters. Forklift Equipped with a reach-type forklift, the above should be paid attention to when installing the through-type rack.
The structural characteristics of the shelves are (warehouse-type shelves, through-type shelves), which are all multi-door types connected by hook-type columns and the extension direction of the pallet unitized goods is stored one after another on the cantilever beam. Structural form, this shelf structure can share the forklift working channel and cargo storage space, effectively improving the storage rate of the warehouse. However, goods in the same aisle cannot be first in, first out. The drive-in shelves can achieve higher storage density, the effective utilization rate of space can reach 90%, and the utilization rate of site area can reach 60%. Although we all know that drive-in racks can effectively improve storage efficiency and help companies improve economic benefits, what we should pay more attention to is how we can better use drive-in racks to make drive-in racks more reflective. Maximize economic benefits.
How to identify the quality of shelves is a very important link in an industry. The shelves of an industry directly affect the efficiency of the industry. How to identify the quality of shelves? Here are some for reference:
1. Shelf material: The domestic material of the shelf should be SS400 steel from Baogang original factory and Shanggang Iron and Steel Factory No. 1.
2. The structure of the shelf: The shelf column depends on whether there are many and even bends in the cross section. The more uniform and symmetrical the structure is, the better. The cross beam of the shelf depends on the hook structure of the cross beam and the form of hanging the cross beam to the column: it is better to have more hooks on the cross beam, and the more stress it can bear, the better; when the hook of the cross beam is hung on the column, it depends on whether the contact between the hook and the column is close and consistent. , the inner side of the hook should be close to the side of the column without any gaps. Only in this way can the structure be stable, strong and durable.
3. Surface treatment of the shelves: The surface spraying treatment of the shelves should be uniform and have strong adhesion. Whether the surface spraying of the shelves is uniform depends on whether there are any omissions on the inner edge of the shelf column holes. You can tap it with a hard object during inspection. If it falls off easily, it means that the shelf is easy to rust.